Results 1 to 3 of 3

Thread: Clarke Tech ET-9000 Control Centre

  1. #1
    Veterano del Vietnan elgeneral's Avatar
    Join Date
    Apr 2011
    Location
    München
    Posts
    5,148
    Post Thanks / Like
    Blog Entries
    143
    Downloads
    17
    Uploads
    54
    Rep Power
    10

    Clarke Tech ET-9000 Control Centre

    Version 1.0 by Lee Hudson - Goldwafers

    Installation Instructions

    Unzip all the files and folders in the zip file to your local hard drive.

    How to Use ET9000CC

    1. Run the ET9000CC.exe application.
    2. Enter the IP address of your Receiver in the IP Address field, example 192.168.1.5
    3. If you have changed the password on your receiver, enter the password in the password field
    otherwise leave blank.
    4. Click Connect Button


    Telnet

    Self explanatory.
    For a list of Busybox commands check out the following website:
    _http://www.busybox.net/downloads/BusyBox.html


    FTP

    Click the FTP Button.
    This will load FileZilla FTP Client and automatically connect to your Receiver
    For instructions on using FileZilla check out the following website:
    _http://wiki.filezilla-project.org/Using


    Settings Backup

    Click on Settings Backup Button.
    Click the Backup Settings Button.
    This will backup all the settings from the Receiver to the enigma2 and tuxbox folders on your PC HDD.
    The /enigma2 and /tuxbox folders will be located in the same folder as this program.

    Click the Restore Clarke Tech Receiver Settings Button.
    All your backup data will be restored to the /etc/enigma2 and /etc/tuxbox folders on the Receiver
    Once the files have successfully been restored you'll have to reboot the receiver by powering off
    and on using the switch on the back of the receiver.


    Media Files Manager

    Uploading a Media File:
    Select the Hard Drive and folder that contains your Media File.
    Select the PVR device you have installed from the "Choose PVR Device" drop down window.
    Click on the Local file you want to upload so it's highlighted in blue.
    Click the Upload Button to transfer the file from your local HDD to the Receiver.

    Downloading a Media File:
    Select the Hard Drive and folder that you wish the file to be transferred too.
    Select the PVR device you have installed from the "Choose PVR Device" drop down window.
    Click on the Remote file you want to download so it's highlighted in blue.
    Click the Download Button to transfer the file from the Receiver to your local HDD.

    Deleting Local File:
    Select Local file so it's highlighted in blue.
    Click Delete Local File Button.

    Deleting Remote File:
    Select remote file so it's highlighted in blue.
    Click Delete Remote File Button.


    HDD Manager

    To mount and format a Hard Disk Drive do the following:
    Select the Hard Disk type.
    Click the Format Button.

    This will erase all the data on the Receiver HDD.

    Wait until the format has completed. It can take approx 10-15 minutes for a 1TB HDD.
    You'll see a command prompt when the format has completed.


    WebControl

    Click the WebControl Button to open WebControl in your default web browser.


    Upload Channel List

    Select the local directory where the Channel List is sorted.
    Double click the folder to list the files.
    Click the "Upload Channel List" Button.
    When you see the "Channel List Uploaded! Reboot Receiver" message box appear click OK.
    Now Reboot Receiver by powering off and on.


    Kind Regards

    Lee.
    Goldwafers






    Download ET9000CC.zip
    Vu+Solo2 White Edition
    Qviart Unic
    Qviart Undro
    Mvision HD 700L
    Vu+ Duo2
    Vu+ Ultimo
    PrismCube
    Matrix Cam Air, Vu+ALLCAM, Argolis Triplex
    CCcam 2.1.3 BlackHole Astra-HotBird

    Hidden Content
    Hidden Content


  2. #2
    Veterano del Vietnan elgeneral's Avatar
    Join Date
    Apr 2011
    Location
    München
    Posts
    5,148
    Post Thanks / Like
    Blog Entries
    143
    Downloads
    17
    Uploads
    54
    Rep Power
    10
    Version 1.1 Released 11-7-2011

    Added IPK Installer.
    Fixed Telnet paste issue. You can now use CTRL V or Right Mouse Button to paste code from clipboard to Telnet Window.
    Attached Files Attached Files
    Vu+Solo2 White Edition
    Qviart Unic
    Qviart Undro
    Mvision HD 700L
    Vu+ Duo2
    Vu+ Ultimo
    PrismCube
    Matrix Cam Air, Vu+ALLCAM, Argolis Triplex
    CCcam 2.1.3 BlackHole Astra-HotBird

    Hidden Content
    Hidden Content


  3. #3
    Veterano del Vietnan elgeneral's Avatar
    Join Date
    Apr 2011
    Location
    München
    Posts
    5,148
    Post Thanks / Like
    Blog Entries
    143
    Downloads
    17
    Uploads
    54
    Rep Power
    10
    Xtrend ET Control Centre by Goldwafers

    Version 1.2 Released 14-01-2012


    Updated Media Files Manager. Now you can upload or download multiple media files to and from the receiver.
    Updated Settings Backup.




    ETCC.exe MD5: 9B1C9D0CC71AFCFFA838911D0805607A
    Attached Files Attached Files
    Vu+Solo2 White Edition
    Qviart Unic
    Qviart Undro
    Mvision HD 700L
    Vu+ Duo2
    Vu+ Ultimo
    PrismCube
    Matrix Cam Air, Vu+ALLCAM, Argolis Triplex
    CCcam 2.1.3 BlackHole Astra-HotBird

    Hidden Content
    Hidden Content


Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Tags for this Thread

Marcadores

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
free counters