How to Install CCcam/MGCamd/Others on Duo/Solo/Uno/ET9000/ET5000

**master G** · 06-24-2011

In this example im going to show how to Install CCcam 2.2.1 on the ViX Image You need access to FTP and CCcam 2.2.1 (or whichever version you prefer) ipk file and your CCcam.cfg file (your details go in here) I use FlashFXP (Filezilla is a great free one too) and below is how I have configured mine, you will need to do the same for yours You need your boxs IP Address/Host Name, Username and Pass in order to connect to your box

As you can see my IP Address/Host Name is xxxxx.dyndns.org or i could have entered 192.168.x.12 my username is root (that is default) my password is xxxxxxxxx (default password is blank or password or dreambox) once you have saved and connected to the box you should get access to the root of your box and should look like the right hand window of the below screenshot

Download your Cam from

HTML Code:

http://****************t.com/emulator-packs-images/1689-cam-pack-vix-image.html

Im after CCcam 2.2.1 which is enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel Once downloaded you need to transfer the enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel.ipk file into the /tmp folder on the box like below

Then transfer your CCcam.cfg file into the /etc/ folder

now go to your box and press Menu/Setup/System/VIX/IPK Installer and you should have enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel.ipk file in there

Press "Green" button to install and once completed it will ask for a "Gui Restart". Press OK and wait for box to come back on Once the box is on press Menu/Setup/Softcam / CI/Softcam Manager and in there if you have done everything correctly you should see CCcam 2.2.1

Press "Green" to start CCcam 2.2.1 and it should now be active like below

Finally Press "Blue" to enable Auto Start and you are now ready and setup with CCcam 2.2.1

Hope you guys find this tutorial helpful.